There are many ways to repair asphalt surfaces, and depending on the type of defect, traditionally a quick 'whack and go' cold bitumen product is the default product. 

The reason for this choice is usually the cost and hassle of trying to get a permanent fixture. Permanent repairs typically require heavy machinery/equipment and hot/warm mix asphalt directly from the local plant, which requires heat to keep warm, and the final application involves heavy rolling equipment. 

However, this does not have to be the case. You can achieve a permanent, long-lasting repair using cold-applied products such as Magma PermaFyx L273, which offers a long-lasting repair with a quick return to service.

The advantages and disadvantages of each are discussed below: 

Disadvantages of hot/warm mix asphalts for repairs smaller than 2MSQ 

• Keeping the mix warm. 

• The cost of gas and the equipment. 

• Application equipment.  

• Requires a roller or vibrating plate, which has a cost, and health and safety risks for handling and HAVS. 

• Minimum batch quantity. 

• Can result in a lot of wastage, and transporting bulk volumes can be an issue. 

 Advantages of hot/warm mix asphalts for repairs smaller than 2MSQ 

• Permanent repair. 

• Will last a long time if applied correctly. 

• Matches in with the surrounding surface.

• Ensures visual appearance is consistent. 

Typically, people quickly default to trying a quick repair with a cold bitumen product which is set by compaction. This is a great temporary measure and will last a reasonable time in certain locations. However, a more permanent solution is required, and in some circumstances, the volume of traffic and the type of traffic will make the temporary bitumen-based product unusable. 

Magma, the surface reinstatement range of products, has just launched a new product that comes with amazing advantages and is the best option for permanent surface repairs under 2MSQ. 

Magma PermaFyx L273 is a cold plastic-based product designed for reinstatements around ironworks, repairing potholes, and other defected asphalt surfaces. The product's cold plastic, MMA (Methyl Methacrylate) formulation gives it excellent adhesion to the substrate, allows for flexibility within the product, and cures fast for a quick return to service. In addition, PermaFyx L273 has exceptional durability, holds up in heavy traffic with no settling and does not lose surface texture, maintaining the slip resistance over its lifetime. 

The advantages of PermaFyx L273 

• The system is 'cold.' 

• No requirement for hot works or energy to keep warm, and no emissions. 

• Simple Application equipment.  

• Simple mixing drill and trowels. 

• No minimum batch quantity. 

• Mix to requirement, reducing any waste to a minimum. 

• Permanent refix cost. 

• Overall cost per repair is low. 

• Permanent repair. 

• Will last longer than the surrounding surface if applied correctly. 

• Matches in with the surrounding surface. 

• Ensures visual appearance is consistent. 

The product comes in two stone sizes – 3mm and 6mm. The 6mm would typically be used for deep fill applications or highways and the 3mm for thinner applications, even feathering out to 3mm, typically in off-highway situations. 

Simple how-to videos can be found here on the application of this product: 

Find out more information by visiting the product pages on our website:  

PermaFyx L273 Permanent Asphalt Repair | 3mm 

PermaFyx L273 Permanent Asphalt Repair | 6mm  

Or why not request one of our experts get in touch today? Contact us at mail@meonuk.com